Filter
Top Products
Avaya 3616 Wireless Telephone and Desktop Charger
with CCMS
555-301-709 Page 17
Issue 2
3. 3616 Desktop Charger
The Avaya Desktop Charger is designed to charge the
Nickel Metal Hydride (NiMH) Battery Packs. Full charging
is accomplished in approximately one an a half hours.
Chargers operate in a 50° to 85° F (10° to 30° C)
environment. Do not expose them to freezing temperatures
or direct sunlight.
The Desktop Charger is shipped with the appropriate power
supply for the site’s location. Place the Desktop Charger on
a flat, horizontal surface. Plug the power supply into the
Desktop Charger and into an appropriate wall outlet.
Caution
Do not place anything in the Desktop Charger other than the
Wireless Telephone. You might damage the contacts. Bent
contacts can keep the Wireless Telephone from charging.
Using the Desktop Charger
The user must end any call in progress by pressing the
Power Off/End Call button on the Wireless Telephone
before placing the handset into the Desktop Charger. The
Wireless Telephone may be off or in standby mode during
charging.
Indicator light
Place the Avaya 3616 Wireless Telephone into the Desktop
Charger slot facing forward. If the Wireless Telephone is
placed correctly, the red indicator light will come on. The
indicator light will not come on when the slot is empty,
when the Avaya 3616 Wireless Telephone is improperly
seated, or when the Desktop Charger has no power applied.
Charging indicator
If the Wireless Telephone is in standby mode, it will display
its extension number and Charging. . .. If the Wireless
Telephone is turned off, only Charging. . . will display. The
dots will be racing during the charging cycle. It is normal
for the Battery Pack to become warm when charging.
Charge Complete
When the Wireless Telephone is fully charged, Charge
Complete
will display. The indicator light will remain on
until the Wireless Telephone is removed.