Filter
Top Products
Hardware Connection
Section 4
0909
This section explains how to physically connect the WIP20 to your computer.
Connecting the WIP20
1. Connect the line-in cables to your sound
card on the back of your computer.
Pink = MIC jack
Green = SPKR jack
2. Connect the line-in cables to the WIP20.
Pink = Mic in
Green = Audio in
3. Connect the AC adapter to the “Power in”
jack on the back of the WIP20.
NOTE: Do not plug use a power cord other
than the one supplied with the WIP20.
Doing so could cause severe damage to
the unit and will void its warranty.
4. Connect a traditional or cordless phone to
the RJ-11 jack on the front of the WIP20.
NOTE: Do not plug the WIP20 directly into
a wall jack. Doing so could cause severe
damage to the unit and will void the
warranty.