Filter
Top Products
Make a Call
25
Change the Volume during the Conversation
By pressing both volume keys (right on top of the display) you can influence the receiver
volume in an active call (4 levels). The change is shown by bars on the display. After the
call the volume falls back to the level configured under „profiles“ (see page 41).
PBX Functions
With the system telephone COMfort DECT you can use most of the functions of the PBX
such as pick up, call transfer, recall on busy and so on as described in the operation
manual of the PBX.
Some functions such as alternation, transfer and so on are differently handled on ISDN
telephones and also on system telephones than described for analog telephones in the
operation manual of the PABX. How to set these functions with the system telephone
COMfort DECT differently is described here.
The functions in the following list are not supported by the system telephone
COMfort DECT:
b
Reject a waiting caller
b
Park the call on the internal S
0
port
b
Call an internal third calling partner
b
Establish a conference