Filter
Top Products
128-7032A
19 of 28
- Momentarily press the MODE button again to access the weather alert
function; the weather icon (
) and AL on or oF appear flashing on
the display.
- Use the Up or Down buttons to enable (on)/disable (oF) the alert
function. The weather icon will stop blinking on the display in the
GMRS mode when the alert is disabled.
- Press the PTT Button to confirm your selection.
- Press and hold the MODE button for at least 2 seconds to exit the
weather function.
NOTE: When the unit is the GMRS/FRS or Weather Band mode, if a
weather alert signal is received, the unit will generate a warn-
ing tone.
Battery Alert
When the battery icon is empty ( ) and flashing on the display, re-
charge unit or install fresh batteries.
NOTE : It takes approximately 1 minute after power on for the battery
level to be displayed. During this time, the Battery Icon will be
blank. After 1 minute, the Battery Icon will be visible indicating
the current battery charge level.
NOTES FOR GOOD COMMUNICATION
1 . The GMRS9010-2 22 channels are shared on a ‘take turns’ basis.
This means other groups may be talking on any of the channels.
A common code of ethics/courtesy is to switch to another vacant
channel and not to attempt to talk over someone who is already using
the channel you first selected.
2. The GMRS9010-2 has been designed to maximize performance
and improve transmission range in the field. To avoid interference,
it is recommended that you do not use the units closer than 5 feet
apart.
19