Audiovox GMRS200W Two-Way Radio User Manual


 
128-6781
12 of 16
Warning
Do not operate the transceiver unless you are licensed to
do so.
Remove the batteries from the transceiver if it is not
expected to be used for long periods. This will eliminate the
possibility of chemicals leaking from the batteries and
corroding the transceiver.
Avoid exposing the transceiver to water or extremes of
temperature.
Do not use this device in or near a mining facility, which
uses remotely triggered explosives or in areas labeled
“Blasting Area”. Accidental detonation may result.
• Do not attempt to modify or in any way increase the output
of this transceiver. Its output is designed to meet the legal
limits set by the FCC.
Do not use this device or change its batteries in potentially
explosive atmospheres as sparks in such areas could result
in an explosion.
Turn your transceiver off wherever posted notices restrict
the use of radios or cellular telephones. Facilities such as
hospitals may use equipment that is sensitive to RF energy.
2. The GMRS200W has been designed to maximize performance and im-
prove transmission range in the field. To avoid interference, it is recom-
mended that you do not use the units closer than 5 feet apart.
3. For best transmission results, always keep your mouth about 2-3 inches
from the microphone (5) and speak slowly in a normal voice.
4. To increase battery life, avoid the Scan feature. SCAN mode will
reduce operating time considerably.
12