Filter
Top Products
14
Vibrator Call
The transceiver is equipped with a vibrator call feature which causes the unit
to vibrate when a call signal is received from another party. This feature can
be activated whenever the user wishes, and provides call notification without
disturbing other people nearby.
To set the vibrator call feature:
- From the GMRS standby mode, press the MODE button 6 times
until the Ub ON or oF icon appears with a blinking VIB icon on the
display.
- Press the Up or Down button to activate the vibrator function ON.
- Press the PTT button to confirm the selection.
With VIB active, the unit will vibrate whenever a call tone is received from
another user.
Weather Alert Mode
The weather alert mode notifies the user of unusual weather situations. To
access the weather alert function:
- From GRMS standby mode, press the MODE button 7 times
to access the weather alert function; the weather icon (
) and AL
On or oF appear flashing on the display.
- Use the Up or Down buttons to enable (On)/disable (oF) the
alert function. The weather icon will stop blinking on the display
when the alert is disabled.
- Press the PTT Button to confirm your selection.
When the unit is in GMRS mode, and a weather alert signal is received, the
unit will generate two warning tones. The unit will then automatically revert
to a previously selected weather channel and the weather alert will be heard.