Filter
Top Products
15
Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the
PTT button is released. This tone alerts the receiving party that the trans-
mission has been terminated intentionally.
To enable and disable the Roger Beep tone:
- From GMRS standby mode, press the MODE Button 8 times until rb
appears on the display with the flashing Roger Beep icon (
) and
on or oF.
- Press the Up or Down Button to select the tone on or off as desired.
- When enabled, the tone icon (
) appears steady on the display.
- Press the PTT button momentarily to confirm selection.
Key Tone
This feature allows the transceiver to sound a confirmation tone whenever
the following keys are pressed: Monitor (M) Button, Up/Down Buttons, MODE
Button, SCAN Button, or the EMG Button.
To turn the key tones on or off,
- From GMRS standby mode, press the MODE Button 9 times until
bp, the Bell (
) icon, and on or oF flash on the LCD display.
- Press the Up or Down Button to toggle the key tone feature On or Off.
- Press the PTT button momentarily to confirm selection.
When the key tone feature is on, the Bell icon appears steady on the
display, and the beep tones sound in response to button activation.
Call Ringer Selection Mode
The transceiver provides 5 user-selectable call ringer melodies to alert you
to an incoming call.
To select your favorite call ringer melody:
- From GMRS standby mode, press the MODE button 10 times;
C will appear on the display, together with a flashing number
between 1 and 5.