Filter
Top Products
-6-
USING YOUR FR-500
Turning the Transceiver on
Pressing the PWR button (8) for 2 seconds will activate the unit.
The speaker will play four ascending beep tones. To turn the unit off,
simply press and hold the power button for at least 2 seconds. The
unit will shutdown as evidenced by a single beep tone.
Volume Level Control
To control audio reception volume level, press the Up (▲) button
to increase volume and press Down (▼) button to decrease
volume. The FR-500 will confirm each press of the up (9) or down
(10) button with a beep tone. A unique tone of two beeps will
indicate that the limit of volume adjustment has been reached.
RADIO
(Right Side)
CHANNEL
SELECT
SWITCH
Low Battery Alert
When the batteries are in need of replacement
or charging, the TX/BATT. LED indicator will
flash once every ½ second.
To Select a Channel
As shown at right, move the channel select
switch (12) upward for CH A (FRS Channel
1), middle position for CH B (FRS Channel 8)
or downward for CH C (FRS Channel 14).