Filter
Top Products
-4-
FUNCTION AND LOCATION OF THE CONTROLS
1. Power Button (PWR): Press and hold this button for 2 seconds
to turn the transceiver on or off.
2. Push-to-Talk Button (PTT): Press to transmit. Release to
receive.
3. Monitor Button (M): Press and hold to bypass the squelch and
listen to channel activity.
4. Belt Clip
5. Battery Compartment
6. Speaker
7. Microphone (MIC)
8. Call Button (CALL): Press this button to send a ringing sound to
other radios tuned to the same channel.
9. Up Button: Press this button to increase the volume.
10. Down Button: Press this button to decrease the volume.
11. LED Indicator (TX/BATT.): Illuminates red when transmitting
or flashes when the battery level is low.
12. Channel Select Switch (CH A/CH B/CH C): Selects channel
of operation (A=FRS1) (B=FRS8) (C=FRS14).
13. Antenna: Rotate counterclockwise when transceiver is in use.
14. Microphone / Charger Jack (MIC/CHG): For use with an
external microphone / PTT button and optional battery charger.
15. Speaker Jack (SP): For use with an Audiovox approved
headset accessory only.