Filter
Top Products
Transmitting a signal
To Transmit manually
1. Set the desired channel number.
2. Press and hold the PTT (Push-to-Talk) button while speaking slowly
and clearly in a normal voice, approximately 2 to 3 inches from
the microphone.
3. The transmission icon will be displayed while transmitting and
the signal’s strength will be displayed the indicator on the left.
4. Release the PTT button when you finish speaking to receive
incoming signals.
The Transmission icon will be displayed whenever the unit is
transmitting a signal, including the automatic transmissions of the
vox and monitor modes.
Continuous Transmission
When desired, the FR-314 can be locked into the transmit mode.
This is useful for continously monitoring all sounds in an area,
however battery life is dramatically reduced in this mode. To initiate
a continuous transmission, momentarily press the power button while
holding the PTT button together. The transmission indicator will
flash to whenever the FR-314 is in continuous transmit mode.
Momentarily pressing the PTT button will terminate the transmission.
Remember, no signals can be received while transmitting.
Transmission icon