Filter
Top Products
ÿ
Scanning Channels
The FR-314 can scan all 14 FRS channels to search for active
transmissions. To begin scanning, press the function button once
or until the channel number flashes on the display, then hold the up
or down button for 2 seconds while the channel number is flashing.
When the scan mode is activated, the scan icon will be displayed on
the LCD. A beep tone will also confirm activation of the scan mode
if the beep conformation tones are active. While in scan mode, the
transceiver will continuously check all channels for activity. If a signal
is received, the transceiver will play the entire signal and continue to
monitor its channel for one second. If no other signals are received,
the FR-314 will resume scanning. Pressing the function select or
PTT buttons will exit the scan mode.
Scan Up
Indicator