Filter
Top Products
WALL MOUNTING INSTALLATION
1 Connect line cord(s) to the telephone.
See Step 1 in Table/Desk Installation.
Two-line jack — Use the 8-inch line
cord, and plug into the jack labeled
L1 OR L1/L2 on the bottom of the
phone.
Two separate jacks — Use the 8-inch
line cord, and the 7-foot line cord with
blue plugs.
2 Attach the base.
See Step 2 in Table/Desk Installation.
3 Reverse the handset tab.
Hold down the switchhook and slide the
tab up and out of its slot. Turn the tab
so the curved end is up, and insert it back
in the slot.
4 Connect the line cord(s) to the
modular jack(s), and mount the phone
on the wall.
Two-line jack — Plug the free end of
the 8-inch cord into the wall jack.
Two separate jacks — Plug the free end
of the 8-inch cord into the jack where
the phone is to be mounted, and plug the
free end of the 7-foot cord into the other
jack.
Place the phone on the wall jack
mounting studs and pull down until it
is held securely.
5 Connect the handset to the telephone.
Plug the coiled cord into the handset jack
on the side of the phone. Plug the other
end into the handset and hang up.
6 Follow Steps 5-8 in Table/Desk
Installation.
INSTALLATION
SETTING THE CLOCK
The clock records the day and time each
message is received.
1 Press C. You hear a day.
2 Press a number button (1 to 7) to choose
the current day (Sunday - Saturday).
3 Press C. You hear a time.
4 Use the number buttons to enter the
correct time.
5 Press * for AM or # for PM.
6 Press C. If you have entered a valid
time, you hear the new day and time. If
you hear five rapid beeps, repeat Steps
1-6.
SELECTABLE DIAL INFORMATION
This telephone has a push button dial
which will work with tone or dial pulse
(rotary) service. Even when set to dial
pulse service, the phone can be switched
temporarily to tone, for access to some
tone-activated computer systems.
Reverse the handset tab.
Connect the line
cord, as described
in instructions.
Set the Dial Mode switch.
Place line cord in channel.