Filter
Top Products
WALL INSTALLATION
1 Fill in directory card
Remove the directory card and write in your own
telephone number. Also write the telephone
numbers (or names) that you want to store in
each memory location.
2 Reverse handset tab
To install the telephone on a wall jack, you must
reverse the small tab beneath the directory card. This
tab holds the handset in place when you hang up.
Remove the directory card and plastic cover. Use
a paper clip to lift and remove the handset tab.
Reverse the tab and reinstall it as shown (Figure 1).
Then replace the directory card and cover.
3 Plug the line cord into the
jack on the underside of the
base. Feed the line cord into the
channel and wind it around the
mounting area. Feed the last
portion (as short as possible),
through one of the slots in the
mounting area (Figure 2).
B
C
D
A
Figure 2
Figure 1
2