Filter
Top Products
14
Telephone operation
Mounting bracket procedure
Wall mount to desktop installation
5. Align the grooves of the bracket with the lower keeper tabs on the base. MakeAlign the grooves of the bracket with the lower keeper tabs on the base. Make
sure the cords are pointing away from you as shown in Figure 9.
4. Tilt the top of the bracket towards you until it is resting on the telephone base.
3. Position your hands as shown in Figure 8. Press your thumbs down on the tabs
that are below the bracket, holding it in place. Use your index fingers to move
the bracket towards yourself.
Lower keeper tabs
Figure 9. Lower keeper tab location
Figure 8. Detaching the bracket from the telephone base