Filter
Top Products
30
Telephone operation
Call transfer using intercom
Use the intercom feature to transfer an outside
call from one handset to another. Unless additional
handsets have been registered, this feature is not
available on model SL82118.
Model SL82218
1. When on an outside call, press
INT. The outside
call is automatically placed on hold. The
transferring set’s screen will show CALLING
OTHER HANDSET. The called handset will ring,
and its screen will show OTHER HANDSET IS
CALLING.
2. On the ringing handset, press
PHONE/FLASH,
INT, SPEAKER, or any dial pad key (0-9, * or
#) to answer the intercom call. You can now
talk without the outside caller hearing the
conversation.
3. Press
OFF/CLEAR on the transferring handset
or place it in the telephone base or handset
charger to complete the transfer. The transferring
handset’s screen will show CALL TRANSFERED
and the other handset will automatically be
connected to the outside call.
NOTES:
1. Before the intercom call is answered, you can cancel the
transfer and return to the outside call by pressing
OFF/CLEAR, PHONE/FLASH, or INT.
2. If the called handset does not answer the intercom call
within 100 seconds, is in directory or caller ID history
mode or is or out of range, the transferring handset will
show UNABLE TO CALL TRY AGAIN on its screen and will
automatically return to the outside call.
3. You can switch between the intercom call and the outside call
by pressing INT on the transferring handset. The display will
alter between INTERCOM and OUTSIDE CALL to indicate
which call is active.
4. You can end the intercom call and return to the outside call
by pressing PHONE/FLASH on the transferring handset.
5. If you register an accessory handset to your SL82118 (for a
total of two handsets), call transfer using intercom will be the
same as model SL82218.
INT