Filter
Top Products
26
IN CASE OF DIFFICULTY
If the caller’s name or phone number is not displayed during
Call Waiting:
• Make sure you subscribe to combined Caller ID with Call Waiting
service.
• The screen may not display the call information if someone is on an
extension phone.
• The Caller ID with Call Waiting feature is inactive during a power
interruption.
• Make sure the battery is charged.
• Make sure Caller ID with Call Waiting is turned on (see the CALLER ID
OPERATION section of this manual).
If the Message Waiting Indicator (NEW CALL Light) flashes when you
have no voice mail:
If the NEW CALL light on the base flashes even when you have no voice mail
waiting, you can stop it from flashing.
1 Make sure the is not displayed.
2 Press U >.
3 Use the softkey to select SETUP. The screen displays CALL LIGHT
OFF?.
4 Select YES. The screen displays CALL LIGHT OFF, and the light
stops flashing. If you have new calls in the call history, the light goes
on steadily. If you have no new calls, the light goes off.
5 Press U to exit.
If the Message Waiting Indicator (NEW CALL Light) does not flash
when you have voice mail:
Voice mail signals can be sent to your home several ways. This phone comes
set to receive all voice mail signal formats. However, once the phone
receives a certain format, it may turn off reception to other formats. Then, if
your telephone company changes equipment, you might need to reset the
phone to accept all voice mail signal formats again.
To reset, disconnect AC power, wait about 15 seconds, then reconnect AC
power. The light should come on with the next voice mail message.