Filter
Top Products
14
You can store up to 20 telephone numbers and names in memory. The
telephone memory works with the Memory Match and Priority Ring features.
When you receive a call from a number you’ve stored in memory, the screen
displays the name information as you’ve stored it, not as the service sends it
(for example, “MOM AND DAD”). Additionally, the phone alerts you to calls
from priority numbers you’ve stored in memory with a special Priority Ring.
Storing Numbers in Memory
1 Make sure the is not displayed.
2 Press U.
3 Use the softkey to select DIR.
4 Use the softkey to select ADD.
5 Enter the number you want to store (up to 24 digits)
— OR —
Select REDIAL to store the last number dialed.
6 Select DONE.
7 Follow the directions below to store a name
— OR —
Select DONE if you don’t want to store a name.
8 Enter a two-digit memory location from 01–20.
9 Select DONE.
Storing a Pause in a Memory Number
While storing a memory number (see “Storing Numbers in Memory”) use the
softkey to select PAUSE where you want dialing to pause for two seconds.
Storing a Name with a Number
1 Follow Steps 1 through 6 under “Storing Numbers in Memory.”
2 Use the keypad to enter a name. To enter the first letter on a key,
press the key once. To enter the second letter on the key, press the
key twice. To enter the third or fourth letter on the key, press the
key three or four times. (To enter subsequent letters from the same
key, press > once to move the cursor; to enter a space, press > >.)
To enter &, @ or
’
, use key 1. To enter (, ) or /, use key 0. To enter
*
, + , –, or ?, use key *. To enter #, $, % or !, use key #.
3 Use the softkey to select DONE when you’re finished entering letters.
4 Enter a two-digit memory location from 01–20.
5 Select DONE.
TELEPHONE MEMORY