Filter
Top Products
18
Telephone Operation
Handset settings
Ringers
At this menu you can change ring volumes, or turn the
ringers off. You can also select one of six ring melodies. You
will hear an example of each ring volume level and ring type
as you scroll through the choices. Settings are selectable for
each line.
Follow the menu instructions to select the volume and
melody you prefer, then select OK or SAVE to confirm.
NOTE:
Choose different ringer melodies for the two different lines so you can
easily identify which line is ringing.
Low battery tone
The handset is factory programmed to alert you with a
tone when the battery is low and needs recharging. Select
ON or OFF, then select OK to confirm.
NOTE
:
If you select OFF you will not hear the Low battery tone.
Keypad tone
The handset is factory programmed to beep at each key-
press. Select ON or OFF, then select OK to confirm.
NOTE:
If you select OFF you will not hear a beep when you press keys.
Contrast
At this menu you can adjust the handset screen contrast to one
of 16 levels. Use or to select the level you prefer,
then select OK to confirm.
Rename
At this menu you can change the name (up to 14 characters)
that appears on your handset screen, and identifies your
handset in all Intercom/Transfer menus.
• To enter characters, see “To Enter a Name” on page 21
and use the dial pad chart.
• Select > to move the cursor to the right. At this point
you can enter a character.
• Select
MORE for additional options:
• Select DEL to delete characters.
• Select SPACE to enter a space.
• Select BACK to go back to the previous screen.
• Select SAVE to store the new name.
+
-
HANDSET 1
RDL CIDMENU
MAILBOXES
DIRECTORY
SETUP HANDSET
REGISTER
^ V
OK
LOW BATT TONE
RINGERS
KEYPAD TONE
CONTRAST
^ V
SET
RENAME
KEYPAD TONE
CONTRAST
^ V
SET
Select MENU
Highlight SETUP HANDSET
Scroll to choose desired item
Select SET
LOW BATT TONE
91-000302-050-000_EP5962Englishmanual_Sep.02,2005.qxd 2/13/1950 7:21 PM Page 18