Filter
Top Products
27
Telephone operation
You can use the handset locator feature to find misplaced handsets.
To start the paging tone:
Press HANDSET LOCATOR on the telephone base to
start the paging tone on all handsets for 60 seconds.
To stop the paging tone:
Press PHONE/FLASH, SPEAKER, or any dial pad
key (0-9, , or #) on the handset(s).
-OR-
Press HANDSET LOCATOR on the telephone base.
-OR-
Put the handset in the telephone base or charger.
NOTES:
If you press OFF/CLEAR or MUTE/DELETE on a handset, the
ringer of that handset is silenced but the paging tone continues on
the other handsets.
If the handset is accessing the answering system, on a call (intercom call or outside call),
or out of range, it does not beep when paged.
You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.
•
•
•
•
•
•
•
Handset locator