AT&T EL51250 Cordless Telephone User Manual


 
14
Directory
Directory overview
The directory is stored in the telephone base, and is shared by all handsets. It stores up
to 100 entries. Changes made to the directory on any one handset apply to all. Only
one handset can review the directory at a time.
Storing names and numbers
You can add new entries to the directory whenever a telephone number shows on the
screen (predial or from caller ID history) by pressing MENU/SELECT then going to step 3
below. To add entries through the menu:
On a handset, press MENU/SELECT when in idle mode. Select >DIRECTORY and
then select >ADD CONTACT.
Use the dial pad keys to enter the telephone number (up to 30 digits) or press
REDIAL/PAUSE repeatedly and then MENU/SELECT to copy a number from the
redial list.
Press MENU/SELECT to save the number in the display.
Enter the name when prompted. Use the dial pad keys to enter a name (up to 15
characters). Each time you press a key, the character on that key appears. Additional
key presses produce other characters on that key. Refer to the character chart in
Create directory entries of the on-line user’s manual for information on entering
special characters.
Press MENU/SELECT to store your new directory entry. The screen shows SAVED.
While entering names and numbers, you can edit them using the following controls:
Press DIR or CID to move the cursor to the right or left.
Press MUTE/DELETE to erase digits or characters.
Press and hold MUTE/DELETE to erase the entire entry.
While entering the telephone number, press and hold REDIAL/PAUSE to enter a
three-second dialing pause (a P appears).
While entering the name, press 0 to add a space.
To review directory entries
Press DIR when in idle mode to show the first entry in the directory.
Press DIR or CID to browse through the directory or press the dial pad keys (0-9)
to start a name search. Entries appear alphabetically by the first letter in the name.
NOTE: If the telephone number in the directory exceeds 15 digits, < appears in front of the
telephone number. Press TONE to move towards the end of the telephone number or press #
to move towards the beginning of the telephone number.
1.
2.
3.
4.
5.
1.
2.