Filter
Top Products
38
I cannot dial
out.
There is noise
or interference
during a
telephone
conversation.
• The handset may be out of range. Move it closer to the
telephone base.
Troubleshooting
• First, try all the suggestions in The telephone does not
ring when there is an incoming call, on the previous
page.
• Make sure there is a dial tone before dialing. It is
normal if the cordless handset takes a second or two to
synchronize with the telephone before producing a dial
tone. Wait an extra second before dialing.
• Make sure the telephone is set to the correct dial mode
(pulse dial or tone dial) for the service in your area.
Refer to the Dial mode section of this user’s manual
(page 11) to set the dial mode.
• If the other telephones in your home are having the same
problem, the problem is in the wiring or local service.
Contact your local telephone company (charges may apply).
• Eliminate any background noise. Noise from a television,
radio, or other appliances may cause the telephone
to not dial out properly. If you cannot eliminate the
background noise, first try muting the cordless handset
before dialing, or dialing from another room in your
home with less background noise.
My phone rings
but when I try
to answer the
call the handset
screen shows
CONNECTING…
• The cordless handset may be too far from the telephone
base. Move closer to the telephone base and try to
answer the call.
Appendix C