Filter
Top Products
35
Answering system operation
Message playback
Press PLAY /STOP to hear messages. The system
announces the number of messages, then begins
playback.
If you have new messages, you will hear only the
new messages (earliest first). If there are no new
messages, the system will play back all messages
(earliest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day and
time it was received.
• After the last message, you will hear "End of
messages." If the system has less than five min-
utes of recording time left, it will announce the
remaining time.
Options during playback
• Press the VOLUME button to adjust speaker
volume.
• Press SKIP to skip to next message (or hold
down to speed up message playback).
• Press REPEAT to repeat message currently
playing. Press twice to hear previous message
(or hold down to slow message playback).
• Press DELETE to delete message being played
back.
• Press PLAY/ STOP to stop playback.
To delete all messages
To delete all messages, press and hold DELETE
while the phone is idle (not during a call, or during
message playback).
1.
“You have [xx] new
messages and [xx]
old messages.”
Number of messages (or, dur-
ing playback, message number
currently playing).
Message playback begins. See
options at right.
2.
Message playback ends.
Press PLAY/STOP to begin
or end message playback.
(Play/Stop)
(Play/Stop)
NOTES:
1. If F is flashing in the mes-
sage window, memory is full.
You will have to delete some
messages before new ones
can be recorded.
2. New (unheard) messages
cannot be deleted.