Filter
Top Products
18
Telephone operation
Handset settings
Using the feature menu, you can change settings to
customize how the telephone works.
Press SELECT MENU, then use the V^ buttons
to scroll to the feature you want to change. As
you scroll through the menu, the top menu item is
always highlighted with a > symbol. Press SELECT
MENU to select the highlighted item.
Press OFF CLEAR at any time to cancel an opera-
tion, turn to the previous menu, or exit the menu
display.
Ringer volume
Using this menu you can set a ring volume level (1-
6), or turn the ringer off (0). Use the V^ buttons
to hear a sample of each volume level, then press
SELECT MENU to select the one you prefer.
-OR-
When the handset is in idle mode, press VOLUME
^V buttons on the right side of the handset to
change ringer volume directly.
Ringer tone
This feature allows you to choose one of 10 ring-
ing tones. Use the V^ buttons to hear a sample
of each ringer tone, then press SELECT MENU to
select the one you prefer.
Key tone
The handset is factory programmed to beep at
each key press. Use the V^ buttons to select ON
or OFF, then press SELECT MENU to save your pref-
erence.
NOTES:
1. The ringer volume level also determines the levels of ringing for
intercom calls (see page 15) and the paging tone when initiating the
handset locator feature (see page 12). If the handset ringer volume
level is set to off (0), that handset is silenced for all calls and paging.
2. If you select OFF, you will not hear the beep tone when you press
keys.
Highlighted
menu item
>DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON