Filter
Top Products
37
Answering system operation
Message playback
Press PLAY/STOP to listen to messages. The
system announces the number of messages, then
begins playback.
If you have new messages waiting, you will hear
only the new messages (oldest first). If there are
no new messages, the system will playback all
messages (oldest first).
Announcements
ƨ Ɛ
number of messages.
ƨ ɆƐ
time it was received.
ƨ ɇƐ“End of mes-
sages.” If the system has less than five minutes
of recording time left, you will hear the time
remaining.
Options during playback
ƨ VOLUME button to adjust the speaker
volume.
ƨ SKIP Ɠ
ƨ REPEAT to repeat the message cur-
rently playing. Press twice to hear previous
message.
ƨ DELETE to delete the message being
played back.
ƨ PLAY/STOP to stop playback.
To delete all messages
To delete all old messages, press and hold DELETE
while the telephone is idle (not during a call, or
during message playback).
1.
“You have [xx] new
messages and [xx]
old messages”
Number of messages (or during
playback, message number cur-
rently playing).
Message playback begins.
See options at right.
2.
PLAY/STOP to begin
or end message playback.
PLAY/STOP
PLAY/STOP
to end message playback.
NOTES:
1. If F is flashing in the mes-
sage window, memory
is full. You will have to
delete some messages
before new ones can be
received.
ǎƓ
is 15 minutes.
3. If you receive calls when
the memory is full, the
telephone will ring 10
times, then answer and
announce “Memory is
full, enter remote access
code.”
4. New (unheard) messages
cannot be deleted.