Filter
Top Products
12
Telephone operation
Basic operation
Last number redial
Press REDIAL/PAUSE to display the most recently
dialed numbers (up to 32 digits). Press CID/-VOLUME
or DIR /VOLUME+ repeatedly to view up to five
recently called numbers. The handset beeps twice at
the beginning or end of the list. Press OFF/CLEAR
to exit. Press PHONE/FLASH or SPEAKER to
redial any displayed number. Or press PHONE/FLASH
then REDIAL/PAUSE to dial the most recently dialed
number (up to 32 digits).
Press MUTE/DELETE to delete the displayed
number from the redial memory.
Temporary ring silencing
Press OFF/CLEAR or MUTE/DELETE while the telephone
is ringing to silence the ringer temporarily. This
will silence the ringer without disconnecting the
call. The next incoming call will ring normally.
Handset locator
If the handsets are misplaced, press HANDSET
LOCATOR on the telephone base. The handsets
will play a paging tone for 60 seconds to help you
locate them. To stop the paging tone, press PHONE/FLASH,
SPEAKER, or any dial pad key (0-9, *, or #) on
the handsets, or press HANDSET LOCATOR on
the telephone base.
NOTES:
1. If the handset ringer is set to off (0), the handset locator feature is
not available (page 17). (page 17)..
2. During a page, if you pressDuring a page, if you press OFF/CLEAR or MUTE/DELETE on the
handset (see this page above), the ringer of that handset will be
silenced, but it will not cancel the page.
INT
REDIAL
555-1234
RINGER MUTE