AT&T E2728B Cordless Telephone User Manual


 
33
Answering System Operation
“You have [xx] new
messages and [xx] old
messages”
Number of messages (or, during
playback, message number cur-
rently playing).
14
Message playback begins. See
options at right.
Message playback ends.
NOTE: If “F” is flashing in
the message window, mem-
ory is full. You will have to delete
some messages before new ones
can be recored.
NOTE: New (unheard) messag-
es cannot be deleted.
Press
PLAY/STOP to begin or
end message playback.
(PLAY/STOP)
(PLAY/STOP)
14
Message playback
Press PLAY/STOP to hear messages. The system
announces the number of messages, then begins play-
back.
If you have new messages, you will hear only the new
messages (oldest first). If there are no new messages,
the system will play back all messages (oldest first).
Announcements
When playback begins, you will hear the total
number of messages.
Before each message, you will hear the day and time
it was received.
After the last message, you will hear “End of mes-
sages”. If the system has less than 5 minutes of
recording time left, you will hear time remaining.
Options during playback
• Press
VOLUME button to adjust speaker volume.
• Press SKIP to skip to next message (or hold down to
speed up message playback).
• Press REPEAT to repeat message currently playing.
Press twice to hear previous message (or hold down
to slow message playback).
• Press DELETE to delete message being played back.
• Press PLAY/STOP to stop playback.
To delete all messages
To delete all messages, press and hold DELETE while
the phone is idle (not during a call, or during message
playback).