AT&T E2728B Cordless Telephone User Manual


 
11
Telephone Operation
DIAL MODE: TONE
MESSAGE WAITING
CLEAR? YES
Cordless handset programming
Choose dial mode
The dial mode defaults to TONE. If you do not have
touch tone service, you’ll need to change the setting to
pulse by following these steps:
1. Press
MENU to begin programming.
2. Press
^ or V until the screen displays
DIAL
MODE
: and the current setting.
3. Press SELECT to start changing current setting.
4. Press
^ or V to display TONE or PULSE.
5. Press
SELECT to choose displayed dial mode and
exit.
Clear Voice Mail (for all cordless handsets)
If you subscribe to voice mail service provided by your
local telephone company, you will be alerted to new
voice mail messages in two ways. When you press
PHONE, the dial tone will toggle on and off (stutter
tone) and you will receive a text message on all cord-
less handsets. To manually remove the stutter tone and
MESSAGE WAITING message on all cordless handset
screens:
• Press MENU.
• Press ^ or V until the screen displays MESSAGE
WAITING.
• Press SELECT then ^ or V to choose YES.
Press SELECT to select YES and exit.
NOTE: This only turns off the displayed message on all cordless handset
screens; it does not delete your voice mail message(s). Use this feature
when the phone indicates there is voice mail when you have none or you
have accessed your voice mail from a different phone line (while away from
home). If there actually is a new voice mail message, your local telephone
company will continue to send the message which turns the display mes-
sage back on.
Choose cordless handset display language
Your phone will default to English handset screen dis-
plays. If you wish to change them to Spanish, follow
these steps:
1. Press
MENU to begin programming.
2. Press ^ or V until the screen displays
LANGUAGE
.
3. Press SELECT to start changing current setting.
4. Press ^ or V to display ENGLISH or ESPANOL .
5. Press SELECT to choose displayed language and exit.
LANGUAGE