Filter
Top Products
10
Telephone Operation
CHAN
MUTE
REDIAL
10
Telephone Operation
RINGER: 1
DATE/TIME
1/01 12:00
AM
RINGER VOL: 2
Cordless handset programming
Follow the steps below to program the cordless hand-
set. To stop at any time, press OFF. If the phone rings,
programming stops automatically so you can answer the
call.
Choose cordless handset ringer sound
1. Press
MENU to begin programming.
2. Press ^ or V until the screen displays
RINGER:
and the current setting.
3. Press SELECT to start changing current setting.
4. Press ^ or V to display 1, 2, 3, or 4. You will hear
a sample of each ringer sound.
5. Press SELECT to choose displayed ringer sound and
exit.
Choose cordless handset ringer volume
1. Press MENU to begin programming.
2. Press ^ or V until the screen displays
RINGER
VOLUME
.
3. Press SELECT to start changing current setting.
4. Press ^ or V to display 1, 2, 3, or OFF. You will
hear a sample of each ringer volume.
5. Press SELECT to choose displayed ringer volume and
exit.
Set cordless handset display date and time
1. Press MENU to begin programming.
2. Press ^ or V until the screen displays
DATE/
TIME
.
3. Press SELECT to view or change date and time.
4. Press ^ or V to start changing month in the date
and time line at the bottom of the display, then press
SELECT.
5. Repeat Step 4 to set day, hour, minute, and AM/PM.
6. Press SELECT to save selection and exit.
NOTE: You can choose to set the time manually, or you can allow it to be
set automatically with incoming Caller ID information. The time will be set
automatically only if you subscribe to Caller ID service provided by your
local telephone company (see page 5). The date and time for the answering
machine need to be set separately (see page 29).
NOTE: If the cordless handset ringer is turned off, the screen will display
RINGER OFF when the cordless handset is idle (not in use). If there are
any un-reviewed calls, the screen will display XX MISSED CALLS instead of
RINGER OFF.