Filter
Top Products
12
Answering system operation
Listen to messages on a cordless handset:
1. When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
2. Press MENU/SELECT again to select >Play messages.
If there are new and old messages, press qCID or pDIR
to select >Play new msgs or >Play old msgs, then press
MENU/SELECT.
If there are only new messages, they will play
automatically.
Options during playback:
Press PHONE/FLASH to stop playback. The screen shows
Call back?, then press MENU/SELECT, PHONE/FLASH, or
/SPEA�ERSPEA�ER to call back the caller.
Press MENU/SELECT to pause playback and show the
caller ID information if available. From here, you can press
OFF/CANCEL to resume playback or press
PHONE/FLASH to call back the caller. If you do not
call back within 10 seconds, message playback resumes
automatically.
Press qCID/VOLUME or pDIR/VOLUME to adjust the message
playback volume.
Press EQ to adjust the message playback audio quality.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous message.
Press MUTE/DELETE to delete the message.
Press 5 or OFF/CANCEL to stop the playback.
Press /SPEA�ERSPEA�ER to switch between speakerphone mode and
handset mode.
NOTE: The equalizer stays on the same settings until you change it by pressing EQ .
•
•
•
•
•
•
•
•
•
•
•
>Play new msgs
Play old msgs
>Play messages
Answering sys
p
q
Charlie Johnson
4-Repeat 6-Skip
MSG#
1/3
10:01
AM
ANS ON
3 New messages
10/15
10:01
AM
ANS ON