Filter
Top Products
Directory
32
Create directory entries
Create a new directory entry
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to >Directory, then press
MENU/SELECT.
3. Press qCID or pDIR to highlight >Add contact.
4. Press MENU/SELECT.
5. Use the dialing keys to enter a telephone number (up to 30
digits) when prompted.
Press q
CID or pDIR to move the cursor to the left
or right.
Press MUTE/DELETE to erase a digit.
Press and hold
MUTE/DELETE to erase all digits.
Press and hold
REDIAL/PAUSE to enter a three-second
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/
PAUSE then
qCID or pDIR, or pressing REDIAL/PAUSE repeatedly to locate the
number. Press MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
The display shows Number already saved if the number
is already in the directory. You cannot save the same
number twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on the next page.
Press q
CID or pDIR to move the cursor to the left
or right.
Press 0 to add a space.
Press
MUTE/DELETE to erase a character.
Press and hold
MUTE/DELETE to erase all characters.
8. Press MENU/SELECT to store your new directory entry. There is a
confirmation tone and the screen shows Saved. To change the entry later,
see page 35.
NOTE: The first letter of every word is a capital letter. The remaining letters in a word start as
lower case letters as shown in the chart on the next page.
•
•
•
•
•
•
•
•
ENTER NAME
Robert Brown_
Saved
ENTER NUMBER
888-883-2445
_
Review
>Add contact
p
q
Answering sys
>Directory
p
q
Robert Brown
888-883-2445