Filter
Top Products
Kickstand
Routing
channel
Line jack
Adjunct
jack
Handset
jack
FCC Warning
Bar Code
label
label
Figure 2. 8510T Voice Terminal (Bottom View With Kickstand)
The various components which appear on the bottom of the 8510T voice terminal are
shown in Figure 2 and listed and explained below.
Adjunct jack
Handset jack
Kickstand
Line jack
Routing channel
Used for connecting an external speakerphone, a
headset adaptor, or other adjunct equipment. The jack
is labeled “ADJUNCT.”
WARNING: Do not insert the handset cord into the
“ADJUNCT” jack. It will cause equipment damage.
Used for connecting the handset cord to your voice
terminal. The jack is labeled .
Can be lifted from the deskstand or can be left level with
the bottom of the voice terminal. Check which
kickstand adjustment allows you the best viewing angle
of the display.
Used for connecting the line cord to your voice terminal.
The jack is labeled “LINE.”
Thread the line cord (and adjunct cord, if applicable)
through the routing channel.
4