Filter
Top Products
ANSWERING SYSTEM
PROBLEM SOLUTION
If CL appears in the You need to reset the clock.The answering
message window: system clock is not set automatically with
incoming Caller ID information.
PROBLEM SOLUTION
If the system does not • Make sure you are calling from a touch
respond to commands tone phone. When you dial a number,
from a remote touch you should hear tones. If you hear clicks
tone phone: instead, the phone is not a touch tone
telephone.
• The answering system may not detect the
Remote Access Code while your
announcement is playing. Try waiting until
the announcement is over before entering
the code.
• Make sure you enter your Remote Access
Code correctly.
• There may be noise or interference on
the phone line you are using. Press keys
firmly.
PROBLEM SOLUTION
If your outgoing • When you record your announcement,
announcement isn’t make sure you speak in a normal tone of
clear: voice, about nine inches from the base.
• Make sure there is no “background” noise
(TV, music, etc.) while you are recording.
64
IN CASE OF DIFFICULTY
IN CASE OF DIFFICULTY
ATT3658B manual-updated 5/19/04 5:34 PM Page 64