Filter
Top Products
55
REMOTE ACCESS COMMANDS
FUNCTION: COMMAND:
Play messages Press #, then enter the appropriate
in a mailbox mailbox number(1, 2, or 3). The system
plays new messages. If there are no new
messages, the system plays old messages.
Repeat a message Press #4while message is playing; press #
4 twice back up another message.
Skip a message Press #6while message is playing; each
press advances another message.
Stop Press #5.
Save messages Hang up.
Delete message Press #9while message is playing.
Review announcement Press #7;system plays announcement,
then beeps.
Record announcement Press *7; after beep, record
announcement, press #5to stop.
System plays back announcement.
Record memo Press *8; then mailbox number where
you want memo recorded; speak after beep;
press #5to exit.
End remote access call Press *0.
Turn system off Press #0; the system announces,“Machine
off.” Press #0again to turn
the system back on.
Turn system on When system is off, it answers after 10 rings
and announces,“Please enter your remote
access code.” Enter your remote access
code.
NOTE: If no key is pressed within 10 seconds of entering remote
access code, the voice menu will be announced. After the voice menu
announcement, if no key is pressed within 20 seconds, the remote
access call will automatically end.
ANSWERING SYSTEM OPERATION
ANSWERING SYSTEM OPERATION
ATT3658B manual-updated 5/19/04 5:34 PM Page 55