Filter
Top Products
4
INSTALLATION
INSTALLATION
3 Install the handset battery.
Use only AT&T Battery 2401, SKU# 91077.
4 Charge the handset battery.
• Place the handset in the base or remote charger.
• Charge the battery at least 12 hours. After the first charge,
the battery will charge in eight hours.
5 Check for dial tone.
• After the batteries are charged, lift the handset and press
PP
; you should hear a dial tone.
b) Align the contacts and place
the battery pack in the
battery compartment.
a) Remove battery
compartment cover by
pressing on indentation
and sliding downward.
c) Replace cover by
sliding it on its
track up over
battery case until
it snaps firmly into
place.
91-5438-20-00_ATT3358_R0 2003.7.11 9:41 AM Page 4