AT&T 260 Telephone User Manual


 
21
CALLER ID OPERATION
Reviewing Call
History
The screen displays call
information for about
30 seconds after it has
been received.
1 Press - to review
the most recent call.
— OR —
Press + to review
the oldest call.
2 Press + or - to
scroll through call
history. When you
reach the end of
call history,the
screen displays
END OF LIST,
then begins again.
Display Dial
Dial a displayed
phone number while
reviewing calls in
call history.
1 Lift the handset.
2 Press and release
D. The
screen displays the
number being
called. If the
screen displays
ERR,the present
number cannot be
dialed.
You cannot use this
feature to dial
PRIVATE or
UNKNOWN calls.
Display Dial Options
You can check or change
the way a number in call history is dialed.
1 Press + or - until the screen displays the number you want to call.
2 Press D to make the call
— OR —
Press N to scroll through choices for dialing the number (without a “1,”
or with a “1”followed by the area code).
Call History
This product assigns
each incoming call a
number from 1 to 99.
The most recent call
will have the highest
number. When the
memory is full, the
oldest call information
is deleted to make room
for new incoming call
information.
260book_1ATT 4/24 4/24/02 6:24 PM Page 21