Filter
Top Products
Base Installation
NOTE: Install the base unit and spare handset charger away from
electronic equipment, such as personal computers, television sets or
microwave ovens. Avoid excessive heat, cold, dust or moisture.
1 Connect the power cord to the base and an electrical outlet
not controlled by a wall switch.
Use only the power cord supplied with this product.
If you need a replacement,call 1 800 222–3111.
3 Install the handset battery.
Use only AT&T Battery 2422, SKU# 23402.
INSTALLATION
Standard
electrical
outlet
Modular
telephone
jack
b) Plug the battery
pack connector
into handset.
Place the battery
pack and wires in
the compartment.
c) Replace cover by
sliding it on its
track up over
battery case until
it snaps firmly
into place.
a) Remove battery
compartment
cover by pressing
on indentation
and sliding
downward.
2 Connect the
telephone
line cord.
2