AT&T 210WH Conference Phone User Manual


 
45
Appendix
Programming/testing of emergency numbers
If this product has memory dialing locations, you may choose to store police, fire department
and emergency medical service telephone numbers in these locations. If you do, please keep
three things in mind:
We recommend that you also write the telephone number on the directory card (if
applicable), so that you can still dial the emergency number manually if the memory dialing
feature doesn’t work.
This feature is provided only as a convenience, and the manufacturer assumes no
responsibility for customer reliance upon the memory feature.
Testing the emergency telephone numbers you have stored is not recommended. However,
if you do make a call to an emergency number:
You must remain on the line and briefly explain the reason for the call before hanging up.
Programming/testing of emergency numbers should be performed during off-peak
hours, such as in the early morning or late evening, when the emergency services tend
to be less busy.
6.
a.
b.
c.
FCC and ACTA information
Part 15 of FCC rules
Some telephone equipment generates, uses, and can radiate radio-frequency energy and, if
not installed and used properly, may cause interference to radio and television reception. This
product has been tested and found to meet the standards for a class B digital device, as specified
in part 15 of the FCC rules.
These specifications are designed to provide reasonable protection against such interference
in a residential installation. However, there is no guarantee that interference will not occur in a
particular installation.
If this product causes interference to radio, VCR or television reception when it is in use, you
might correct the interference with any one or all of these measures:
Where it can be done safely, re-orient the receiving radio, VCR or television antenna.
To the extent possible, relocate the radio, VCR, television or other receiver with respect to the
telephone equipment.
If this telephone product runs on AC power, plug your product into an AC outlet that’s not on
the same circuit as one used by your radio, VCR or television.
Consult a dealer or an experienced radio/TV technician for help.
Modifications to this product, not expressly approved by the manufacturer, could void the
user’s authority to operate the equipment.