Filter
Top Products
Mute
Mute lets you hear the other party, but prevents the other party
from hearing you.
To mute a call, press and release m. The MUTE light
goes on.
To return to two-way conversation, press and release m.
Flash
Press and release F instead of pressing the switchhook to ac-
tivate services such as Call Waiting or Three-Way Calling. You
might have to press other buttons before or after F as explained
in the custom calling instructions provided by your service pro-
vider.
Temporary Tone
If you have dial pulse (rotary) service, this feature allows you to
enter codes or tones needed to operate answering machines, or
use electronic banking services, calling cards, and other special
services. This feature will operate most special services; how-
ever, some services may actually require a touch tone line. To be
sure, ask the company that provides the special service.
NOTE: If you have touch tone service, you do not need to use the
Temporary Tone feature.
1 Dial the call, then press and release * (TONE). Any
buttons pressed after this will send tone signals.
2 After you hang up, the phone automatically returns to
dial pulse (rotary) dialing.
Dial Mode
This phone comes set to operate with touch tone service. If you
have dial pulse (rotary) service, you will need to reset the dial
mode. If you hear clicks (not tones) when you dial, you have dial
pulse (rotary) service.
To change to dial pulse mode:
1 Press and release G.
2 Press #, #, #, 3.
To change back to touch tone mode:
1 Press and release G.
2 Press #, #, #, 8.
Ringer Volume
Use the RINGER switch located on the right side of the phone to
turn the ringer OFF, or to set it to LO or HI volume. You can
make or answer calls when the ringer is off, and other phones on
the same line are not affected by the setting.
Handset Volume Control
While on a call, use V to adjust the listening level. Press the
top arrow to increase volume. Press the bottom arrow to decrease
volume.
Redial
Press and release R to dial the last number you dialed (up to
32 digits). The last number you dialed is stored in redial memory
until you dial another number.
Hold
To put a call on hold, press and release H. The HOLD light
flashes. You can return the handset to the cradle without discon-
necting the call.
To take a call off hold, press and release H
— OR —
Lift the handset of this phone
— OR —
Lift the handset of another phone on the same line as this
phone.
TELEPHONE OPERATION