Filter
Top Products
10
Telephone Operation
Press
@PROG/CHAN
to begin programming
Press
V
or
^
to display
features one by one
Press
SELECT
to modify a
displayed feature
To stop at any time, press
O
Customizing your telephone
Follow the steps below to program the telephone. To
stop at any time, press O. If the phone rings, program-
ming stops automatically so you may answer the call.
Choose ringer sound (see note on next page)
1 Press @PROG/CHAN to begin programming.
2 Press ^ until screen displays
RINGER
& setting.
3 Press SELECT to change current setting:
4 Press ^to display 1, 2, 3, 4, or OFF. You will hear a
sample of each ringing type.
5 Press SELECT to select displayed ringing type and
exit.
Set date and time
1 Press @PROG/CHAN to begin programming.
2 Press ^until screen displays
DATE/TIME
.
3 Press SELECT to view or change date and time:
4 Press V or ^to change month, then press
SELECT.
5 Repeat Step 4 to set day, hour, minute, and AM/PM.
6 Press
SELECT to save selection and exit.
RINGER: 1
DATE/TIME
1/01 12:00
AM
NOTE:
You can choose to set the time manually, or you can
allow it to be set automatically with incoming Caller ID information. The time
will be set automatically only if you subscribe to Caller ID service provided by
your local telephone company (see page 5).
Default setting: 1
Default setting:
1/01 12:00 AM
91-5677-20-00.ATT1477.RO.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 10