AT&T 1040 Telephone User Manual


 
34
One-touch setup and operation
One-touch overview
This telephone has 32 one-touch locations
(speed dial locations) where you can store phone
numbers you wish to dial using fewer keys than
usual. You can store up to 24 digits in each
location. The steps used to dial numbers stored
in one-touch locations vary according to how
you programmed the one-touch preference. See
PREFERENCE on page 35 and To dial a one-
touch number on page 38 for more details.
The first 16 locations can be accessed using only
the one-touch buttons. To access the remaining
16 locations, press [LOWER] and then the one-
touch button for the desired location.
You may wish to write the names or telephone
numbers of the one-touch entries on the directory
card, using the light gray spaces for the first 16
locations and the dark gray spaces for the second
16 locations (page 16 of the installation guide).
one-touch buttons
16 one-touch locations
(all light gray spaces)
16 lower one-touch
locations
(all dark gray spaces)
NOTE: The one-
touch buttons are also
used to place intercom
calls. See Intercom
operation beginning
on page 25 for details.