Filter
Top Products
10
Telephone operation
Basic phone operation
continued from previous page
Handset
• To make a call:
1. Lift the handset.
2. Dial a number.
• To override automatic line selection, press the
LINE button for the line you wish to select, then
lift the handset.
• To answer a call, lift the handset.
• To hang up, place the handset on the base.
Speakerphone
• To make a call:
1. Press and release the desired LINE button or
[ SPEAKER]. The SPEAKER light goes on.
2. Wait for a dial tone, then dial the number.
• To answer a call, press [ SPEAKER] or press
the LINE button of the incoming call.
• To end the call, press [ SPEAKER].
NOTES:
• If SPEAKERPHONE is selected in the AUTOMATIC
MODE menu (page 39 of the installation guide),
pressing any line key will select the line and acti-
vate the speakerphone. If HEADSET is selected in
the AUTOMATIC MODE menu and a headset is
connected, pressing any LINE key will select the
line and activate the headset.
• If HEADSET is programmed as the default mode,
you must press [ SPEAKER]. to activate the
speakerphone.
continued on next page