Filter
Top Products
10. Using a phone to restart the System
After you have set all the parameters, you need to restart IPC 1000 series to start PPPoE and get a new IP address.
1.Pick up the phone and press
2. ##0000 You will hear 3 short tones.
3. 981# Restarts the IPC 1000 series unit.
4.
Hang up the phone.
You have to configure the IP of the called number or doing the IP learning before making IP phone calls. If the recipient IPC
1000 series unit is using a public and static IP address, you can manually edit the IP address and phone number in your phone
book and then directly call the recipient phone number over IP. However if the recipient IPC 1000 series is using DHCP or PPPoE, it
requires an IP learning process to acquire recipient IP address. You can also join an IPN series to get the recipient IPC 1000 series’
IP address. Following shows you how to edit phone book and IP learning.
4. Editing Phone book or IP learning
4. Click the “Apply”
button to apply any
3. Enter the
PPPoE
information.
1. Select BASIC
Button.
2. Select PPPoE
Fill in the (PPPoE) account
username and password, re-enter
the password to confirm