Filter
Top Products
Note: If the IPC 1000 series unit’s IP address has been set to public or static IP mode; you must configure the IP Address and
Subnet Mask of the PC to be in the same subnet as the IPC 1000 series unit rather than using IP address “192.168.0.5” and Subnet
Mask “255.255.255.0” as the above illustration demonstrates.
3. Entering the Web Based Management Interface
4. Configuring the IPC 1000 series unit’s IP Modes using the Web Based Interface
Note: If you need to configure any other parameters after the IP mode configuration is done, do not restart the IPC 1000 series unit
as it will use the new IP setting. When this happens, you may no longer be able to access the IPC 1000 series unit using a web
browser. You will then need to use a phone or console to configure the IP back to its default or fixed IP address such as
“192.168.0.2”.
The IPC 1000 series
unit’s IP address
Fill in”WEB” (all capitals) and the
password that you have configured
in the basic configuration section
Press the “OK” button