Filter
Top Products
Auto Dialing the first number stored in M1.
A. From keypad
1. Press ON/OFF button or just press M1.
2. The number is dialed automatically
within 7 seconds.
B. Using Remote Transmitter With Scan
function on:
1. Press Remote Transmitter.
2. The number is dialed automatically
after scanning all memories 3 times.
C. With Scan function off:
1. Press Remote Transmitter.
2. The number is dialed automatically.
Dialing by using the SCAN button
Before you can use memory scanning for dial-
ing, you must have the phone numbers stored in
the memory first (page 6). To use memory scan-
ning, the Scan function must be on. See
Chapter 4 section C. Memory locations with no
number stored are skipped. The memory direc-
tory is scanned three times or until a number is
selected. If no number is selected, the first number
in M1 is dialed.
1. Press the SCAN
button.
2. The memory location indicators light
up as it scrolls down the memory
locations.
If you have DIALOGUE
RC
–100:
Only the first six memory locations
are scanned.
If you have DIALOGUE
RC
–200:
All 20 memory locations are
scanned (It "beeps" when advancing
to the next memory location.)
3. When the desired memory location is
lit, press the SCAN button again to
select.
CHAPTER 5
(CONTINUED)
VOL
PROG
SCAN
MUTE
HEADSET
MIC
4. The DIALOGUE
RC
automatically dials the
number selected.
5. Press the ON/OFF
button to hang up.
Dialing using the Remote Transmitter
A. With Scan function on:
1. Press the Remote
Transmitter to begin
scanning.
2. When the desired memory location is lit,
press the Remote Transmitter. The
DIALOGUE
RC
automatically dials the
number selected.
3. Press the Remote Transmitter once
to hang up.
B. With Scan function off:
1. Press the Remote Transmitter once.
2. It dials the first number stored in M1.
Using the keypad
1. When the phone rings,
press the ON/OFF
button to turn it on.
2. When finished, press
the ON/OFF button to
hang up.
Using the Remote Transmitter
1. When the phone rings,
press the Remote
Transmitter to turn on.
2. Press the remote
button once to hang up.
FLASH/PAUSE
REDIAL
MUTE
ON/OFF
HEADSET
MIC
Figure 16
Figure 17
FLASH/PAUSE
REDIAL
MUTE
ON/OFF
HEADSET
MIC
Figure 18
Figure 19
C. Answering phone calls
7
Figure 15