22
Technical Information
This cordless telephone uses radio frequencies to allow mobility. There are certain
difficulties in using radio frequencies with a cordless telephone. While these are
normal, the following could affect the operation of your system.
Noise
Electrical pulse noise is present in most homes at one time or another. This noise is
most intense during electrical storms. Certain kinds of electrical equipment such as
light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses.
Because radio frequencies are susceptible to these noise pulses, you may
occasionally hear them in your handset. Generally they are minor annoyance and
should not be interpreted as a defect in your system.
Range
Because radio frequency is used, the location of the base unit can affect the
operating range. Try several locations in your home or office and pick the one that
gives you the clearest signal to the handset.
Interference
Electronic circuits activate a relay to connect the cordless telephone to your
telephone line. These electronic circuits operate in the radio frequency spectrum.
While several protection circuits are used to prevent unwanted signals, there may be
periods when these unwanted signals enter the base unit. You may hear clicks or
hear the relay activate while you are not using the handset. If the interference occurs
frequently, it can be minimized or eliminated by lowering the height of your base
antenna or by relocating the base unit. You can check for interference before
selecting the final base unit location by plugging in the phone.
NOTICE:
This cordless telephone uses radio communication between the handset and the
base unit and may not ensure privacy of communication. Other devices, including
other cordless telephone, may interfere with the operation of this cordless telephone
or cause noise during operation. Units not containing coded access may be
accessed by other radio communication systems. Cordless telephones must not
cause interference to any licensed radio service.
Technical Information
MANUAL(430-0102-)V3.p65 02-10-23, 11:3022