Filter
Top Products
11
Desk Mounting
One of the special features of your equipment is the unique design of the MOUNTING
BRACKET which can hold your phone at an angle of 15°when desk mounting.
There are two positions to choose from:
1. Normal position (Mounting Bracket not required)
For normal position, as shown in Figure 1, place the base unit on any desired
but suitable location.
2. 15° position (See Figure 2)
With the back of the base unit facing up, insert the upper hooks of the MOUNTING
BRACKET into the matching slots of the base unit. Press down on the opposite
side of the MOUNTING BRACKET until the lower hooks locks into place.
Desk Mounting
FIGURE 1
MANUAL(430-0102-)V3.p65 02-10-23, 11:3011