Aiphone LEM-3 Intercom System User Manual


 
– 4 –
88
SPECIFICATIONS
77 TECHNICAL PRECAUTIONS
AIPHONE CO., LTD., NAGOYA, JAPAN
AIPHONE CORPORATION, BELLEVUE, WA, USA
AIPHONE EUROPE N.V., ANTWERP, BELGIUM
LEM-I(E) 0901A
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a
period of one year after delivery to the ultimate user and will repair free of charge or replace at no charge, should it
become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself
the sole right to make the final decision whether there is a defect in materials and/or workmanship; and whether or not the
product is within the warranty.
This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in
violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This
warranty does not cover batteries or damage caused by batteries used in connection with the product.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by
Aiphone.
Aiphone will not be responsible for any costs incurred involving on site service calls.
LEM equipment is rated to operate between temperatrues 0°C ~ +40°C (+14°F ~ +104°F).
LE-D & LE-DA door stations are weather-resistant, but it is suggested to protect against direct weather. Do not apply caulking
or sealant around door station. The opening allows moisture to dissipate.
Do not wash LE-D/DA with direct pressure water.
Clean LEM equipment with a soft cloth dampened with neutral household cleanser. Never use an abrasive cleaner or cloth.
Power source: 6V DC, 200mA max.
Power supply: Use a PS-6D,PS-6M or SKK-620 power supply.
Communication: Sub call-in with tone and a lit LED, 20 seconds.
(LED on LEM-3 only)
Press TALK button to transmit, release to listen.
Output: 350mW.
Wiring: 2 wires per sub, non-twisted & non-polarized, shielded.
Cable specified: #822202 in USA.
Wiring distance: LEM to LE subs
Diameter 0.65mm
" 1.0mm" 22AWG 18AWG
Distance 200m 480m 650’ 1,570’
Dimensions & weight:
LEM-1: 160H x 132W x 51D (mm).
6-1/4” H x 5-1/4” W x 2” D. 300g (0.66 lbs.) approx.
LEM-3: 180H x 143W x 55D (mm).
7” H x 5-5/8” W x 2-1/4” D. 400g (0.88 lbs.) approx.
200m
Receivin
g
durin
g
communication (on LEM-3
)
C
all-in from another sub lights an LED only, staying 20 seconds. Upon present communication finished, depress an LED li
t
se
l
ector
b
utton
.
LE sub station
s
To call LEM master, simply press CALL button. It rin
g
s on LEM as lon
g
as the button is depressed. Upon selected, voic
e
from LEM is heard, repl
y
handsfree toward the unit
.
Printed in Thailand
(
E
)