Aiphone JA-DGV Intercom System User Manual


  Open as PDF
of 3
 
WIRING PRECAUTIONS
JA-DGV
1. Keep video wires at least 12" away from AC 100~240V
power lines.
2. Use 2 conductor non-shielded wire with PE insulation.
(Aiphone 871802 wire.) Coax-cable cannot be used.
3. If there are unused wires in the cable, install a 120Ω
resistor between each pair of unused conductors.
4. Do no mix audio/video wires with those of another
video door station or device in the same cable.
Do not install the video door station in the following
locations:
- Places subject to temperature/humidity extremes.
- Places subject to dust, vapor, smoke, or chemicals.
- Places that are strongly backlit.
- Places where direct sunlight or strong light comes
into the camera lens.
MOUNTING LOCATIONS & HEIGHT
OPERATION
Calling: Momentarily press CALL button on the door station.
After person at the monitor station replies, talk hands free while standing in front of the camera.
TECHNICAL PRECAUTIONS
Caulking seals: Do not apply any caulking seals around the video door station. Water drainage holes on the
bottom will help water or moisture to dissipate.
Cleaning: Clean JA-DGV with a soft cloth dampened with neutral household cleanser. Never use any
harsh cleanser or cloth. Do not spray high-pressure water on the video door station.
Pg. 2
JA-2MCD
IMAGE VIEW AREA (approx.) when panned-and-tilted
•The image view area is a guideline and may vary according to environment.
•The peripheral part of the monitor may be slightly distorted.
•The image may have reflective light coming into the lens from the camera cover.
 previous