Aiphone JA-2MECD Intercom System User Manual


 
- 11 -
To send video signal to AV equipment
The image on the monitor is printable via composite VIDEO OUT
terminal, connected to a Video printer, etc. (Select a model which
handles NTSC signals).
10-3
10-1
During replay
During replay; When a door station has called or camera has
been activated, it is indicated by an on-screen mark, and its call-
in image is viewed and saved automatically. (Replay mode is
ended.) View visitor and communicate.
Notes:
Room call-in has no on-screen mark shown. The replay mode is
terminated.
When initiating replay, auto-picture memory (for door call-in) is
not effective for approx. 2 seconds.
10-2
When PLAY & REC buttons are both lit
1. When the system has not been used for months or turned off
for more than 30 minutes after power failure, etc., PLAY &
REC buttons are lit. In this case, press SET button. Two
buttons lights turn off. Set PICTURE MEMORY MODE again.
2. If SET button is still lit or flashing, turn it off by following
these steps: Release SURVEILLANCE-SET mode (Page10).
SET flashes Press PLAY SET lit Press SET SET
light turns off
Notes:
When changing PICTURE MEMORY MODE, all the pictures
previously saved will be erased.
10
MULTI-MODE OPERATIONS
Specifications
Power source: DC 24V
Consumption: (MAX) 750mA (JA-2MECD)
(MAX) 680mA (JA-2MCD).
(MAX) 290mA(JA-2HCD).
Calling: Chime & image, Approx. 30 sec.
Communication: AUTO Handsfree voice activation
MANUAL Press to talk, release to listen
Video-monitor: 4 inch direct view TFT color LCD
Scanning line: 525 lines
Door release contact:
AC 12V, 0.35A (dry closure contact L, L).
Run a separate cable for audio/video signal
and door release contact.
Dimensions: 210H x 160W x 42D(mm).
8-1/4H x 6-5/16W x 1-5/8D.
Weight: 820g (1.81 lbs.) (aprox.) (JA-2MECD)
770g(1.70 lbs.) (approx.) (JA-2MCD)
730g (1.61 lbs.) (approx.) (JA-2HCD)
Technical Precautions
Operating temperature: 0°C ~ 40°C (+32°F ~ +104°F).
Image may vary when Door release button is held down. This is
not a malfunction.
Cleaning: Clean the units with a soft cloth dampened with
neutral household cleanser. Do not use any abrasive cleaner or
cloth.
Door station is weather-resistant. But do not spray high-pressure
water on door station directly. Unit trouble could result.
In case of system malfunction, turn off the power switch of
master station. If this doesnt solve the problem, disconnect DC
power and contact qualified technician.
11
TECHNICAL PRECAUTIONS
12
SPECIFICATIONS
T
A
LK
B
R
IG
H
T
N
E
S
S
E
N
T
R
A
N
C
E
M
O
N
IT
O
R
R
O
OM
PLA
Y
S
ET
REC
EN
T
R
A
N
C
E
R
E
L
E
A
S
E
DARK
BRIGHTNESS
1
2
VIDEO OUT
JA-2MECD
14 / OCT / 01 13:30
NTSC
14 / OCT / 01 13:30
12 / OCT / 01 14:30
[1]
[2]
SET
REC
PLAY
JA-2MECD
PLAY
SET
REC
REPLAY
TA
LK
B
R
IG
H
T
N
E
S
S
E
N
T
R
A
N
C
E
M
O
N
IT
O
R
R
O
O
M
SE
T
E
N
T
R
A
N
C
E
R
E
L
E
A
S
E
DARK
BRIGHTNESS
1
2
SET
SET
SET