Filter
Top Products
Menu
5:
Programming
<<
,&,
While connecting date
to
the system, whole system is not operatable including PANIC CALL.
Before initiating PROG~MMING
<<
operation, make sure ROOM number has been programmed on Menu RESIDENCE INFO.
+@
.
DECIDE
&
NEXT
J
J
-+
Lift the handset
(Security Guard Station)
Programming
Step
4
1
At an Residential Station number
I,
lift handset.
Communication channel is established.
With Scroll buttons,
have the assigned
Name displayed,
and press
@
button
Hearing single BEEP tone means the station has been correctly set.
(Double beep tone
for
second station)
Hang up handset.
Go
to each Residential stations, and consecutively program each handset station in the same manner as in Programming Step..
Hang up handset.
(Security Guard station)
+@
J
DECIDEh-BACK
+
@
+
Standby
DECIDE &BACK
NOTES;
If
already
two
Residential Stations have been linked, setting a third station will produce a warning beep tone.
To
erase linkage have the assigned name displayed, press CALL button more than
3
seconds.
Continuous tone notifies the link has been cancelled.
-3-